The dry film thickness of the thermal spray coating can generally be controlled by the following method. Coating thickness report Usually, before the project starts,…
Thickness measurements for conventional coatings are typically measured for wet film and dry film thickness in accordance with the SSPC-PA2 standard or the ISO 2808…
Whether it is a mechanical part or a metal part, the most prominent problem is surface wear or corrosion or both. Here is a brief…
A ceramic coating is applied to the substrate to increase corrosion resistance. The ceramic coating is formed by melting a ceramic rod using a mixture…
The phenomenon of bombarding the surface of the target with ions so that the atoms of the sputtering target are knocked out is called sputtering.…
What is the metal film coating? A metal film is a solid continuous film obtained by primary coating. It can be applied to the surface of…
Although supersonic flame spraying has many advantages, it also has drawbacks. In the preparation of nano-coating, the temperature of ordinary supersonic flame spraying can reach…
Be careful when choosing a spray process. To make sure that the coating meets the requirements of your application, you should consider the working conditions…
Ion Implantation Ion implantation technology began in the 1960s. This technology rapidly injects high-energy charged ions into the near surface of the metal under vacuum…
The glass coating is applied to a glass surface by 1)a method such as a vacuum method or an electroless plating method, or 2) using…